Description
The product will be available for sale in the first quarter of 2027.
The UCE-CT730L brings together essential electronic testing tools in one instrument. Combining a curve tracer, oscilloscope, waveform generator, and short-circuit finder, it supports component testing, circuit analysis, and fault diagnosis through a unified interface.
Dual-Channel Curve Tracer
Examine the voltage-current characteristics of components and unpowered circuits. The dual-channel display allows direct comparison between a known-good reference and a suspect circuit, helping reveal differences that may be difficult to identify with conventional measurements. Automatic mode adjusts the test conditions, while comparison tools assist in evaluating the displayed curves.
Dual-Channel Oscilloscope
Observe waveforms, inspect signal behavior, and compare two signals simultaneously. Trigger controls help capture events of interest, while on-screen measurements and cursors support closer analysis. XY mode provides an additional way to examine the relationship between two signals.
Waveform Generator
Generate 16 different types of signals—such as sine, square, triangle, and DC—for circuit testing and development. Adjustable frequency, amplitude, and offset make it easy to apply a suitable test signal and observe how a circuit responds.
Ohmmeter & Short-Circuit Finder
Measure resistance and trace low-resistance paths when troubleshooting unpowered circuits. The short-circuit finder combines resistance readings with a visual proximity indicator and audible feedback, helping guide the search for a short across a circuit board.
Display & File Management
A touchscreen interface and USB mouse support provide convenient access to the instrument’s functions. Capture screenshots to document measurements, organize saved images with the built-in file browser, and transfer files over USB for reports, technical support, or further review.
PC Interface
Control the oscilloscope, curve tracer, and signal generator directly from your computer through the USB-connected PC software. View waveforms and curves on a larger screen and adjust instrument settings from a single workspace. A key feature is the ability to build your own curve tracer reference databases by saving known-good component and circuit signatures together with their test settings. Associate test points with locations on a PCB image, recall stored references, and compare live measurements against them without keeping a known-good board connected. Test results and PDF reports help document the troubleshooting process and build a reusable reference library for future repairs.
Specifications:
- Display: 7.0 inch 800× 480 pixel color LCD with Touch screen
- Oscilloscope Channels: 2
- Curve Tracer Channels: 2
- Signal Generator Channel: 1
- Short-Circuit Finder
- PC connection: Type-C USB connector (USB 2.0 HID protocol).
- Storage: internal 4GB disk (microSD card)
- HDMI out for TV or Monitor (800×480 @60Hz)
- Mouse support to operate the device easily
- Power Consumption: 10W
- Dimensions: 203 x 133 x 30 mm
Features of Oscilloscope:
- Analog Bandwidth: 2MHz
- Maximum sampling rate: 10-bit 13.2 MS/s Real-Time Sampling
- Sampling depth: 48kB
- Input impedance: 1MΩ
- Vertical sensitivity: 50mV/div~10V/div
- Horizontal sensitivity: 1us/div~500ms/div
- Max input voltage: ±30V (X1 Probe), ±300V (X10 Probe)
- Coupling: AC/DC
- XY Mode
- Trig modes: Run, single, hold functions
- Trigger functions: rising / falling edge
- Auto Measurement: frequency, peak-to-peak voltage, mean voltage, RMS voltage
- Cursor: differential measurement for time and voltage
- FFT analyze: 1024 points FFT analyze
- Math Functions: CH1 FFT, CH2 FFT.
Features of Curve Tracer:
- Waveform: Sine wave
- Test Frequencies: 20Hz ~ 10kHz (36 steps)
- Open circuit Voltage: ±0.2V ~ ±30V (34 steps)
- Source Resistance: 10Ω, 47Ω, 100Ω, 470Ω, 1kΩ, 4.7kΩ, 10kΩ, 47kΩ, 100kΩ
- 5 programmable user buttons
Features of Signal Generator:
- Signals: Sine, square, triangle, sawtooth, sinC, noise, exponential, full wave, half wave, gauss, direct, staircase.
- Frequency Range: 1 Hz to 300 kHz.
- Output Amplitude: Up to 60 Vpp (±30 V) at frequencies up to 100 kHz.
- Above 100 kHz: Up to 24 Vpp (±12 V) for sine waves and 12 Vpp (±6 V) for other waveforms.
Package List:
- UCE-CT730L Device
- 2 sets 4mm banana multimeter probes
- 2 pcs X1, X10 Oscilloscope Probe
- 12V 2A power supply (EU Type)
- USB cable

























Reviews
There are no reviews yet.